Product detailsOur Factory can produce many kinds of Auto?Air?Conditioning?AC?Compreor?Clutch?Hub/Plate,Clutch ,?Compreor Clutch,?Control Valve, , A/C Tools etc.with Good Quality and One Year Quality Warrantee.PRODUCT?DESCRIPTIONItem NumberINTL-FC001( without??ndle?bearing )Item NumberINTL-FC001A( With?ndle?bearing )Compreor type:Tampa Front of CVC Compreor RC.501.024RC.600.010 / 062 / 066 / 110 / 280/ 282/ 284 / 462/ 464 / 466Note:1, Dear buyer, we also whole for parts, if you order more quantities, more compatitive prices are offered.2, If your ae is e area, you need to pay more 35 US s for e fee or change another ae that is not e.Basic Requirements when servicing an A/C system:1, The Accumulator or Filter Drier should always be repd when the Air Conditioning System is opened.For warranty Purposes buyer must show evidence of receiver/drier repment.In some vehicles the drier comes attached to the condenser so it must repd as well2. A/C system must be clean and free of debris and contaminants. In most cases components can be flushed;however in some instancesit may be neceary to rep the condenser or other it.3. Orifice tube must be repd; expansion valve must be inspected and repd if dirty or defective.4. Correct amount and type of oil must be used. Please refer to the OE manufacturer for this information.5. Prior to refrigerant charging, full vacuum must be done for a minimum of 45 minutes. In humid climates or during cooler days,this time should be increased to effectively remove air and boil off moisture.6. The Orifice Tube, if equipped, should always be repd and the Expansion Valve, if equipped, should at least be inspected for proper operation if not repd.7. As Air shipping limit, we put few oil before shippment, so when you get the compreor, please put out all the compreor oil.Package:Office & Showroom:Factory &Workshop: